![background image](http://html1.mh-extra.com/html/amx/enova-dvx-3150hd/enova-dvx-3150hd_operation-reference-manual_2939055044.webp)
Wiring and Device Connections
31
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
ID Pushbutton
The ID pushbutton (FIG. 42) sets the NetLinx ID assignments of the Internal Control Device. It has no effect
on the Internal Switcher Device. Only the 5001 ID can be changed. It is not possible to change the 5002 device
ID.
LAN (RJ-45)
The LAN RJ-45 port provides 10/100 Mbps communication via Category cable. This is an Auto MDI/MDI-X
enabled port, which allows you to use either straight-through or crossover Ethernet cables.
The LAN port automatically negotiates the connection speed (10 Mbps or 100 Mbps), and whether to use half
duplex or full duplex mode. This communication is reflected via the front ICSP LED.
FIG. 44 provides the pinouts and signals for the LAN connector and cable.
FIG. 45 describes the blink activity for the LAN connector and cable.
FIG. 42
ID Pushbutton
FIG. 43
LAN port
FIG. 44
RJ-45 wiring diagram
FIG. 45
LAN connector / LEDs
ETHERNET
A
L
L/A
- Activity LED (green)
lights when receiving or
transmitting LAN
data packets
SPD
- Link LED (amber) lights when
the LAN cables are connected
and terminated correctly.