Programming
82
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Audio SEND_COMMANDs (Cont.)
AUDMIC_EQ_FT
Sets the filter type of the first
band of the equalizer for the
microphone port.
Set the filter type of the first band of the equalizer for the microphone port
addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_FT-1=<type>'"
Variable:
<type> range is: {bell, band pass, band stop, high pass, low pass, treble shelf,
bass shelf}.
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_EQ_FT-1=band pass'"
Sets the filter type for the first band of the equalizer for the selected microphone
port (#1 based on D:P:S) to band pass.
?AUDMIC_EQ_GAIN
Requests the gain on the
specified microphone band
on the audio output port.
Requests the gain on the microphone equalizer setting of band <band> on the
output audio port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_EQ_GAIN-<band>'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'?AUDMIC_EQ_GAIN-1'"
Returns a COMMAND string of the form: EQUALIZER-<band>=<value>.
AUDMIC_EQ_GAIN
Sets the gain on the
specified microphone band
on the audio output port.
Sets the gain on the microphone equalizer band <band> on the output audio
port addressed by the D:P:S to <value>.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_EQ_GAIN-<band>=<value>'"
Variables:
band = 1..3
value = -12..12. The units are in dB.
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'AUDMIC_EQ_GAIN-1=8'"
Sets the gain on microphone band #1 of audio port 1 equalizer to 8.
SEND_COMMAND AUDIO_OUTPUT_2,"'AUDMIC_EQ_GAIN-3=10'"
Sets the gain on microphone band #3 of audio port 2 equalizer to 10.
?AUDMIC_EQ_Q
Requests the quality factor
(Q) for the first band of the
equalizer for the microphone
port.
Requests the quality factor (Q) for the first band of the equalizer for the
microphone port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?AUDMIC_EQ_Q-1'"
Example:
SEND_COMMAND AUDIO_OUTPUT_1,"'?AUDMIC_EQ_Q-1'"
Returns a COMMAND string of the form: EQUALIZER-<band>=<value>.
AUDMIC_EQ_Q
Sets the quality factor (Q) for
the first band of the
equalizer for the microphone
port.
Sets the quality factor (Q) for the first band of the equalizer for the microphone
port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'AUDMIC_Q-1=<factor>'"
Variable:
factor = 0.1 to 20.
Example:
SEND_COMMAND MICROPHONE_1, "'AUDMIC_Q-1=1'"
Sets the quality factor for the first band of the equalizer for the selected
microphone port (#1 based on D:P:S) to 1.
