![background image](http://html1.mh-extra.com/html/amx/enova-dvx-3150hd/enova-dvx-3150hd_operation-reference-manual_2939055017.webp)
Overview
4
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
DVX-3150HD/DVX-3155HD Specifications (Cont.)
Rear Panel Components: (Cont.)
CONFIG DIP Switch:
8-position Master configuration DIP switch allows setting the Serial Programming
port baud rate and onboard Master execution mode (PRD or normal). See the
CONFIG DIP Switch
section on page 29 for more information.
PROGRAM Port:
DB9 connector (male) connects to a DB9 serial port on a PC, for serial
communication. This connection is used to configure system settings.
Note
: This port is not recommended for firmware updates or large file transfers. Any
large data-intensive operations are better handled via Ethernet.
See the
PROGRAM Port
section on page 30 for more information.
ID Pushbutton:
Black ID pushbutton sets the NetLinx Device ID assignments of the Internal Control
Device. See the
ID Pushbutton
section on page 31 for more information.
LAN Port:
RJ-45 connector provides TCP/IP communication. See the
LAN (RJ-45)
section on
page 31 for more information.
AxLink Port:
1 3.5 mm 4-pin captive-wire connector provides data and power to external control
devices. The AxLink LED (green) indicates the state of the AxLink port. The AxLink
port can be used to supply power to downstream AxLink-compatible devices as long
as the maximum current draw is less than 1 Amp.
Note:
The AxLink port provides only limited power to connected AxLink devices. It is
recommended to use an alternate power source when connecting AxLink devices to
the DVX.
Note:
When using the DVX with the NXA-PDU-1508-8 power distribution unit, do
NOT c12V power from any of the NXA-PDU's AxLink ports to the AxLink
power pin.
See the
AxLink Port and LED (4-pin captive-wire)
section on page 32 for more
information.
Power Connector:
IEC Power cord connector: 100-240V AC, 47-63Hz
Operating
Environment:
• Storage temperature: -10º C to 70º C (14º F to 158º F)
• Operating Temperature: 0º C to 40º C (32º F to 104º F)
• Operating Relative Humidity: 5% to 85% non-condensing
Supported Video
Resolutions:
HD resolutions up to 1080p and RGB resolutions up to 1920x1200@60Hz. Higher
resolutions are supported in pass-through mode. See the
Available Pixel Display and
Refresh Rates
section on page 113 for a complete listing of all supported video
resolutions.
Dimensions (HWD):
5 3/16" x 17" x 14" (13.2 cm x 43.2 cm x 35.6 cm)
Weight:
18.2 lb (8.26 kg)
Enclosure:
Metal with black matte finish
Certifications:
• FCC Part 15 Class A
• IC CISPR 22 Class A
• C-Tick CISPR 22 Class A
• CE EN 55022 Class A and EN 55024
• LVD EN 60950-1
• IEC 60950-1
• cULus UL 60950-1