![background image](http://html1.mh-extra.com/html/amx/enova-dvx-3150hd/enova-dvx-3150hd_operation-reference-manual_2939055115.webp)
Programming
102
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Video SEND_COMMANDs (Cont.)
?VIDIN_PREF_EDID
Requests the preferred
resolution of the EDID
source for the video input.
Requests the preferred resolution of the EDID source being mirrored by the
video port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_PREF_EDID'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_PREF_EDID'"
Returns a COMMAND string of the form: VIDIN_PREF_EDID-<resolution>.
VIDIN_PREF_EDID
Sets the preferred resolution
for the EDID source for the
video input.
Sets the preferred resolution for the EDID source to mirror in video input port
addressed by D:P:S. You can only set the preferred resolution if you use the
VIDIN_EDID command to set the EDID source to All Resolutions, Wide-screen,
or Full-screen.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_PREF_EDID-<resolution>'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_PREF_EDID-
1280x1024,60'"
?VIDIN_RES_AUTO
Requests the status of the
auto resolution setting on
the video input port.
Requests to see if the video input port addressed by the D:P:S has its auto
resolution setting enabled or disabled.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_RES_AUTO'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_RES_AUTO'"
Returns a COMMAND string of the form:
VIDIN_RES_AUTO-<ENABLE|DISABLE>.
VIDIN_RES_AUTO
Sets the status of the auto
resolution setting on the
video input port.
Enables or disables whether the video input port addressed by D:P:S is
supposed to have its resolution auto detected.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_RES_AUTO-<ENABLE|DISABLE>'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_RES_AUTO-ENABLE'"
?VIDIN_RES_REF
Requests the resolution of
the video input port.
Requests to resolution of the video input port addressed by the D:P:S.
Syntax:
SEND_COMMAND <DEV>, "'?VIDIN_RES_REF'"
Example:
SEND_COMMAND VIDEO_INPUT_1,"'?VIDIN_RES_REF'"
Returns a COMMAND string of the form: VIDIN_RES_REF-<h>x<v>,<rate>.
VIDIN_RES_REF
Sets the resolution and
refresh rate of the video
input port.
Sets the resolution and refresh rate of the video input port addressed by D:P:S.
Invalid combinations are ignored by the SWITCHER.
Syntax:
SEND_COMMAND <DEV>,"'VIDIN_RES_REF-
<horizontal>x<vertical>,<refresh-rate>'"
Variables:
horizontal = An integer value representing the horizontal.
vertical = An integer value representing the vertical. May have an additional
qualifier such as 'i' or 'p'.
refresh-rate = An integer value representing the refresh rate.
Example:
SEND_COMMAND VIDEO_INPUT_1,"'VIDIN_RES_REF-1440x480i,59'"
For a list of supported resolutions, see the
Appendix A - Input
Resolutions
section on page 113.