![background image](http://html1.mh-extra.com/html/amx/enova-dvx-3150hd/enova-dvx-3150hd_operation-reference-manual_2939055108.webp)
Programming
95
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Audio SEND_COMMANDs (Cont.)
?VOLUME
See the
?AUDOUT_VOLUME
section on page 93.
VOLUME
See the
AUDOUT_VOLUME
section on page 93.
?XPOINT
Requests the mix level of
the input port.
Requests the mix level contribution of the audio input port addressed by
<input> to the audio output mixer addressed by <output>.
Syntax:
SEND_COMMAND <DEV>, "'?XPOINT-<input>,<output>'"
Variables:
input = LINE, MIC1, MIC2
output = 1..4 where 1 is for the AMP output and 2, 3, and 4 are for the
LINEOUT output.
Example:
SEND_COMMAND AUDIO_OUTPUT_2,"'?XPOINT-LINE,2'"
Returns a COMMAND string of the form: XPOINT-<value>,<input>,<output>.
XPOINT
Sets the mix level of the
audio input.
Sets the mix level that the audio input addressed by the parameter <input>
provides to the audio output <output> to <value>.
Note
: Audio input ports 1..10 share a setting across them for a specific
output mixer's value.
Syntax:
SEND_COMMAND <DEV>, "'XPOINT-<value>,<input>,<output>'"
Variables:
value = -100..0
input = 1, 2, 3 where 1=Selected audio input, 2=Mic1, and 3=Mic2
output = 1..4 where 1 is for the AMP output and 2, 3, and 4 are for the
LINEOUT 2-4 outputs.
Example:
SEND_COMMAND AUDIO_OUTPUT_2,"'XPOINT--75,LINE,2'"
Sets the mix level of the selected input’s contribution to the audio LINEOUT (2)
output to -75.