![background image](http://html1.mh-extra.com/html/amx/enova-dvx-3150hd/enova-dvx-3150hd_operation-reference-manual_2939055119.webp)
Programming
106
Enova DVX-3150HD/3155HD All-in-One Presentation Switcher Operation/Reference Guide
Video SEND_COMMANDs (Cont.)
VIDOUT_HSIZE
Sets the horizontal size of
the image displayed on the
video output port.
Sets the horizontal size of the image on the video port addressed by the D:P:S
to <value>.
Syntax:
SEND_COMMAND <DEV>, "'VIDOUT_HSIZE-<value>'"
Variables:
value = 25..800
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"'VIDOUT_HSIZE-100'"
Sets the horizontal size of video output port (#1 based on D:P:S) to 100.
?VIDOUT_MUTE
Requests if all-port video
output is muted.
Requests to see if VIDEO mute is enabled or disabled.
Syntax:
SEND_COMMAND <DEV>, "'?VIDOUT_MUTE'"
Example:
SEND_COMMAND SWITCHER,"'?VIDOUT_MUTE'"
Returns a COMMAND string of the form: VIDOUT_MUTE<ENABLE|DISABLE>
VIDOUT_MUTE
Enable or disable video
output display.
Enables or disables VIDEO mute.
Syntax:
SEND_COMMAND <DEV>,"'VIDOUT_MUTE-<ENABLE|DISABLE>'"
Example:
SEND_COMMAND SWITCHER,"'VIDOUT_MUTE-ENABLE'"
?VIDOUT_ON
Requests the active status
of a video output.
Requests to see if a video output is enabled or disabled.
Syntax:
SEND_COMMAND <DEV>, "'?VIDOUT_ON'"
Example:
SEND_COMMAND SWITCHER,"'?VIDOUT_ON'"
Returns a COMMAND string of the form: VIDOUT_ON-<ON|OFF>.
VIDOUT_ON
Activates a video output
display.
Turns on or turns off a video display.
Syntax:
SEND_COMMAND <DEV>,"'VIDOUT_ON-<ON|OFF>'"
Example:
SEND_COMMAND SWITCHER,"'VIDOUT_ON-ON'"
?VIDOUT_OSD
Requests whether the OSD
setting is enabled.
Requests whether the video port addressed by the D:P:S has the OSD setting
enabled or disabled.
Syntax:
SEND_COMMAND <DEV>, "'?VIDOUT_OSD'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"'? VIDOUT_OSD'"
Returns a COMMAND string of the form: VIDOUT_OSD-<ENABLE|DISABLE>.
VIDOUT_OSD
Enables the OSD for the
video port.
Enables or Disables the On Screen Display (OSD) setting on the video port
addressed by the D:P:S. If enabled, then the OSD setting is on. If disabled, then
the OSD setting is off.
Syntax:
SEND_COMMAND <DEV>," VIDOUT_'OSD-<ENABLE|DISABLE>'"
Example:
SEND_COMMAND VIDEO_OUTPUT_1,"' VIDOUT_OSD-ENABLE'"