AMF REECE Decostitch, Parts And Service Manual, Page: 80 / 118

1-66
S-104-100
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
CLAMPING
Engagement of Clamp Arms
The engagement of the clamp is automatic when the machine is under power. The clamps engage when
the tip of the clamping lever pushes down on the toggle lever, which in turn locks the clamps in place for
sewing. To adjust, perform the following steps:
1. Turn the left hand crank until machine is in home position. Manually bring down the clamps by pulling
lever
D forward.
2. Continue to turn the left hand crank until the under side of clamping arm tip B engages with lower end
of toggle lever A . This should happen without binding the machine. If this causes binding, or clamp arm
does not engage with toggle lever, loosen screws C and move clamp arm tip B up or down as necessary.
Once the adjustment has been made, re-tighten screw C .