1-38
S-104-100
Revised 09/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
RACE ADJUSTMENTS
Race to Side of Bedplate
1. Remove the throat plate, loopers and spreaders.
2. Set the machine in the eye mode, using eye / no-eye shifter
A
located in the rear of the bedplate.
3. Turn the left hand crank, stopping once to ensure that holes
B
(located on the head and bedplate) are in
alignment.
4. Locate scribe line
C
on the rear of the bedplate. Using a straight edge, mark a matching scribe line onto
the head at position
D
. Slowly continue to turn the left hand crank until the machine has started into the
eye portion of the cycle. Stop turning the left hand crank once scribe lines
C
and
D
are in alignment.