1-48
S-104-100
Revised 09/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
EYESHAPE ADJUSTMENT
1. Looking at the newly created stitch pattern, determine which way nut
A
should be moved in order for a
correct eye shape to be obtained. Use the examples below as a guide.
2. To adjust for the eye shape, loosen nut
A
located on the combination lever
B
. Move nut up or down as
necessary. If the shape of the eye looks like Example 1, move nut down; if the shape of the eye looks like
Example 2, move nut up.
3. Once the adjustment has been made, re-tighten nut
B
. Cycle the machine to ensure correct stitch pattern
has been obtained. If the correct stitch pattern has not been obtained, repeat the above steps.
NOTE:
It is not uncommon to repeat the above steps several times.