1-59
S-104-100
Revised 09/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
CLAMPING
Alignment of Clamp Plates to Bedplate
1. Make sure the machine is in the home position.
2. Install clamp plates
A
, making sure that the clamp plates are parallel to the bedplate on both sides. If
they are not, perform steps 3 through 5.
3. Loosen screw
B
on outstop
C
, and screw
D
on instop
E
.
4. Manually push the right clamp towards the side of the bedplate. To adjust, loosen post
F
, slide it to the
right or left as necessary. Once the adjustment has been made, re-tighten post
F
.
5. Repeat steps 3 and 4 for the other clamp.