1-60
S-104-100
Revised 09/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
CLAMPING
Adjusting the Clamp Plate Spread
1. Turn the left hand crank until the rollers on clamp plates
A
are positioned to the widest part of spreader
block
G
, which is located on the rear of the knife holder. Move the clamp plates side to side in order to
center them to the middle of bedplate.
2. Gently press outstop
C
against the side face of clamp plate
A
, and re-tighten screw
B
.
3. Repeat steps 1 and 2 for the other clamp.