AMF REECE Decostitch, Parts And Service Manual, Page: 34 / 118

1-20
S-104-100
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
STOP MOTION ADJUSTMENTS
5. The clearance between brake shoe L and right hand stop wheel B should be 0.25 mm (.010“). To adjust,
place the appropriate feeler gauge between brake shoe L and right hand stop wheel B . Pull rocking lever N all
the way forward, holding it forward, turn right hand stop wheel B counterclockwise until it locks.
6. Ensure all end play between three fork lever O and rocking lever N has been removed. This is done by
sliding the rocking lever shaft all the way to the casting. Move the three fork lever to the right, which will
remove all the end play. Re-tighten screw
M . Remove the feeler gauge.
Minimum 3 mm 4 mm
Worn-out part New part
M
B
L
O
N
It is necessary to replace the
worn out part with a new one.