1-36
S-104-100
Revised 09/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
STOP MOTION ADJUSTMENTS
5. The adjustment described in step 4 may need to be repeated several times in order to establish the
proper home position. To check, turn main power on and cycle the machine to ensure that it is stopping in
the home position. If it is not stopping in the home position, repeat step 4 (increasing the clearance be-
tween dogs will stop the machine sooner; decreasing the clearance will stop the machine later).
6. Once the machine stopping properly in the home position, continue cycling. This is to ensure it is
starting as well as stopping correctly, and that all adjustments have been done properly. If the machine is
not starting and / or stopping correctly, re-check each step to ensure adjustments have been done accu-
rately.
7. If an emergency stop is required, lifting the latch will stop the stitching and allow the machine to return
to the home position. Before starting the next buttonhole, ensure the latch is positioned squarely over the
stitch rod. If it is not squarely over the stitch rod, push rocking lever to the rear until the latch positions
itself over the stitch rod.