AMF REECE Decostitch, Parts And Service Manual, Page: 78 / 118

1-64
S-104-100
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
CLAMPING
Clamp Foot Position and Needle Entry Point
The clamp feet must be adjusted so the needle is not allowed to strike the clamp foot on the right hand
stroke of the needle bar. To adjust, loosen screw A in mounting base B of clamp arm C. Move the
mounting base of the clamp arm in either direction 1 or 2 (moving the mounting base in direction 1 will
decrease the distance between the needle and the clamp foot; moving it in direction 2 will increase the
distance). Once the adjustment has been made, fasten the mounting base of the clamp arm in place.