1-2
S-104-100
Revised 09/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
TABLE SET-UP AND ROTATION CHECK
1. Unpack the table, connect electrical plug, and turn the main power on.
2. Make sure the left hand motor pulley rotates counterclockwise. Once this has been done, turn the main power
off.
3. Place the rubber cushions
onto the top surface of the table.
4. Unpack the machine and set it on the table, lining the machine up with the four larger holes. Be sure to lift the
machine by the base.
CAUTION:
Do not lift the machine by the bedplate.
5. Place the machine
on rubber cushions
, screw the screws
, insert the cushions under them.