MEGAPOWER 48 / ADTTE
8200-0170-05, REV. A
OPERATION AND PROGRAMMING REFERENCE GUIDE
5 of 43
Figure 4: Keypad button locations
F
1
F
2
+
-
Prog
User
Site
Last
Next
On
Off
Run
Hold
Salvo
Clear
Mon Arm
Auxiliary
Off
PG-RIGHT
On
PG-LEFT
Shot
Enter
Pattern
Exit
Menu
Lock
Pswd
Config
Ack
Open
PG-DN
Close
PG-UP
Iris
1
2
3
4
5
6
7
8
9
0
A. Numeric Keypad:
Keys ranging from 0 to 9 that
enable the user to enter numbers assigned to
specific cameras, monitors, salvos, tours,
presets, patterns, auxiliaries, sites, and macros.
B. +:
Multi-function key that is used with the
Config
button to increase selected ADTTE
settings. When used with the
Shot
function,
enables preset programming.
C. –:
Multi-function key that is used with the
Config
button to decrease selected ADTTE
settings. When used with the
Shot
function,
enables preset recall.
D. Lock:
Multi-function key used to toggles the
lock state of the keyboard when the password is
entered. When used in conjunction with camera
selection, toggles the camera control lock.
E. Auxiliary OFF (Page Left):
Multi-function key
that is used to deactivate an auxiliary device in
Monitor Operate mode. Displays page to left in
Menu mode.
Auxiliary ON (Page Right):
Multi-function key
that is used activate an auxiliary device in
Monitor Operate mode. Displays page to right in
Menu mode.
F. Pswd:
Sets or changes the keyboard lock
password. There are two types of passwords:
Permanent
and
User Defined
.
G. Shot (Enter):
Multi-function key used to recall
shots (presets) in Operate mode. Used to
program shots in Program mode. Used to store
data in Menu mode.
Pattern (Exit):
Multi-function key used to run or
repeat patterns in Operate mode. Used to
program patterns in Program mode. Used to exit
menu programming in Menu mode.
H. Config
: Used to adjust ADTTE keyboard
settings, such as backlighting and key click
volume.
I. Menu:
Used to display the MP48 main menu of
the attached switching system. It also enables
the use of the menu programming buttons. This
key is under keyboard lock protection.
J. ACK:
Used to acknowledge alarms, run tours,
set and repeat patterns in Operate mode.
K. Iris OPEN (Page Down):
Multi-function key
used to open the selected camera’s iris in
Monitor Operate mode. Displays next menu
page down in Menu mode.
L. Iris CLOSE (Page Up):
Multi-function key used
to close the selected camera’s iris in Operate
mode. Displays prior menu page up in Menu
mode.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
