American Dynamics ADTTE, Operation And Programming Manual

Page: 29 / 43

MEGAPOWER 48 / ADTTE 8200-0170-05, REV. A
OPERATION AND PROGRAMMING REFERENCE GUIDE
29 of 43
To change settings:
1. Move the cursor to the CAMERA number line.
Enter the camera number (real or pseudo), and
press
Enter ( Shot ).
2. Press Enter ( Shot ) to toggle the Video Loss
setting. When the correct setting is displayed,
continue with step 3.
3. Change the camera title.
a. Press Next to move to the Title field. Two
cursors display: the Title Cursor and the
Selection Cursor .
b. Press Next to move the Title Cursor until the
correct character/position in the title is
highlighted.
Note: You must start from the first character
in the title and move through the text until the
desired character position is selected. You
cannot backspace through the title.
c. Use the joystick to position the Selection
Cursor over the letter, number, or symbol to
include in the title. Press Enter ( Shot ) to add
the selected character to the title.
d. Repeat steps 3b and 3c until the title is
complete.
4. When finished making changes, press Exit
( Pattern ) to return to the previous menu.
Changing Preset Titles
Use Preset Titles to program a 2-line, 16-character
title that appears whenever a preset is displayed.
PRESET TI TLE- ????
TI TLE -
- - - - - - - -
- - - - - - - -
ABCDEFGHI JKLMN
OPQRSTUVW
XYZab
cdef ghi j kl mnop
qr st uvwxyz 012
3456789 <>: - . / ;
MP48 supports up to 4096 preset titles (96 presets
X 48 cameras). See
Assigning Preset Titles to
Cameras/Presets for information about assigning
the title.
To program preset titles:
1. Enter a preset title number (1-4096), and press
Enter (Shot) .
2. Change the preset title:
a. Move the cursor to the Title lines. Two
cursors display: the Title Cursor and the
Selection Cursor .
b. Press Next to move the Title Cursor until
the correct character/position in the title is
highlighted.
Note: You must start from the first character
in the title and move through the text until the
desired character position is selected. You
cannot backspace through the title.
c. Use the joystick to position the Selection
Cursor over the letter, number, or symbol to
include in the title. Press Enter ( Shot ) to add
the selected character to the title.
d. Repeat steps 3b and 3c until the title is
complete.
3. When finished making changes, press Exit
( Pattern ) to return to the previous menu.