MEGAPOWER 48 / ADTTE
8200-0170-05, REV. A
OPERATION AND PROGRAMMING REFERENCE GUIDE
35 of 43
Field Description/Options
Aux
Auxiliary:
Activates the relay
associated with the selected camera
for auxiliary control. If no auxiliary
action is required for the tour entry,
enter a zero in this field. Relays 1-4
can be set to “
On
”. Relays 1-3 can be
set to “
Off
”.
CN
Connect Next:
Three options are
available.
N (no):
The connect next function is
not enabled. The salvo stops at the
current position.
Y (yes):
The connect next function is
enabled The next camera is called to
the next contiguous monitor.
S (salvo):
If salvo is selected for the
last entry, another pre-programmed
system salvo is called, and the salvo
being programmed stops at the
appropriate position.
Note:
Programming examples for configuring
different salvo entries are found in the
MP48
Programming and Operation Manual
. Refer to
these examples for specific details.
To program a system salvo:
1. Select a salvo to program.
a. Move the cursor to the salvo number line of
the menu.
b. Enter the salvo number (1-64) and press
Enter
(
Shot
).
2. Enter a camera or salvo number.
a. Move the cursor to the cross point of the
CAM
column and the appropriate entry row.
b. Enter the camera or salvo number and press
Enter
(
Shot
).
Note:
Press
Enter
(
Shot
) without entering a
camera/salvo number to remove the camera
entry.
3. Set the function to call a preset or pattern.
a. Move the cursor to the cross point of the
FUNCT
column and the appropriate entry
row.
b. Press
Enter
(
Shot
) to toggle between
PR
(preset) and
PT
(pattern). When the
appropriate function is displayed, press
NEXT
.
c. Enter the preset (1-96) or pattern (1-3)
number for the entry. A zero entry indicates
no preset or pattern.
Note:
If the Connect Next field is set to S
(salvo), a zero value must be entered for a
preset or pattern.
d. Press
Enter
(
Shot
).
4. Set an auxiliary action.
a. Move the cursor to the cross point of the AUX
column and the appropriate entry row.
b. Press
Enter
(
Shot
) to display the AUX
options:
1
= 1 ON
5
= 1 OFF
2
= 2 ON
6
= 2 OFF
3
= 3 ON
7
= 3 OFF
4
= 4 ON
8
= 0 – (no action)
Note:
If the Connect Next field is set to S
(salvo), do not enter an auxiliary action.
c. Press
Next
when the correct setting is
displayed.
5. Set the connect next selection.
a. Move the cursor to the cross point of the CN
column and the appropriate row entry.
b. Press
Enter
(
Shot
) to display the connect
next options or enter the number for the
appropriate selection and press
Enter
(
Shot
).
1=N
No link or last member of a CN salvo
2=Y
Connect to next entry in a CN salvo
3=S
Call a pre-programmed system salvo
6. Repeat steps 2 through 5 to program additional
salvo entries. When finished making changes,
press
Exit
(
Pattern
) to return to the previous
menu.
