MEGAPOWER 48 / ADTTE
8200-0170-05, REV. A
OPERATION AND PROGRAMMING REFERENCE GUIDE
32 of 43
Changing Keyboard Priority Levels
1. Enter the keyboard number (
1-32
), and press
Enter
(
Shot
).
2. Enter the
Priority Level
(
1-8
), and press
Enter
(
Shot
) to save.
Note:
Priority levels are individually configurable.
In general, “
8
” should represent the highest
priority level; “
1
” should represent the lowest
priority level. Keyboards with higher priority
levels can capture control of cameras from
keyboards with lower priority levels.
3. When finished making changes, press
Exit
(
Pattern
) to return to the previous menu.
Configuring Priority Settings
Use
Priority
to configure settings relating to system
functions that a user or keyboard may perform.
PRI ORI TY
LEVEL 1
ADD USER Y/ N
SYSTEM RESET Y/ N
LOCK CAM ABI LI TY Y/ N
OVERRI DE N/ Y
MENU ACCESS Y/ N
CHANGE PARAMETERS Y/ N
The following settings are available:
Setting Description/Options
Level
Currently selected priority level that is
being configured.
Add User
Y (Yes):
New users can be added.
N (No):
New users cannot be added.
System
Reset
Y (Yes):
System reset allowed via
keyboard commands.
N (No):
System reset not allowed via
keyboard commands.
Lock Cam
Ability
Y (Yes):
Lock camera control
allowed.
N (No):
Lock camera control not
allowed.
Setting Description/Options
Override
Y (Yes):
Override of
keyboard/camera view and control
partitioning restrictions allowed.
N (No):
Override of keyboard/camera
view and control partitioning
restrictions not allowed.
Menu
Access
Y (Yes):
Access to programming
menus allowed.
N (No):
Access to programming
menus not allowed.
Note:
Menu Access
must be
enabled to access the
Change
Parameters
setting.
Change
Parameters
Y (Yes):
Changing system
parameters allowed through the
menus.
N (No):
Changing system
parameters not allowed through the
menus. Menus can only be viewed.
To configure a priority level:
1. Move the cursor to the
Level
menu item.
2. Enter the priority level number (1-8), and press
Enter
(
Shot
).
3. Move the cursor to the menu item you want to
change. Press
Enter
(
Shot
) to change the
setting.
4. Repeat step 3 for each setting you want to
change.
5. When finished making changes, press
Exit
(
Pattern
) to return to the previous menu.
