MEGAPOWER 48 / ADTTE
8200-0170-05, REV. A
OPERATION AND PROGRAMMING REFERENCE GUIDE
13 of 43
Running Salvos
A salvo is a group of camera scenes that can be
called for simultaneous display on a contiguous
group of monitors. Up to 64 salvos may be
programmed. The
Salvo
key is located to left of the
numeric keypad beneath the
Run
and
Hold
keys.
Figure 15: Salvo key
Run
Hold
Salvo
To call a salvo:
1. Enter the number of the first (lowest numbered)
monitor in the salvo group.
2. Press
(Monitor).
3. Enter the salvo number (1-64).
4. Press
Salvo
. The salvo will appear on the
appropriate monitor group.
The first monitor of the salvo group displays “HOLD”
on the status line. The remaining monitors in the
salvo group display “SALVO”.
Note:
If a salvo is called in response to a system
alarm, the first monitor of the salvo group displays
“ALARM” on the status line. The remaining monitors
in the alarm salvo group display “SALVO”.
