MEGAPOWER 48 / ADTTE
8200-0170-05, REV. A
OPERATION AND PROGRAMMING REFERENCE GUIDE
4 of 43
Figure 3: ADTTE keyboard features
n
5
xt
1. The
LCD
displays status information, the
selected monitor and camera numbers, and
keyboard operating status. It also displays
system prompts and messages. The following
illustrates the fields that normally appear on
the LCD.
a b c d
e
a. The
Site
(STS) field shows the status of
the connected switching system.
b. The
Monitor
(MON) field shows the
monitor number currently under keyboard
control.
c. The
Camera
(CAM) field shows the
camera number currently under keyboard
control.
d. The
Entry
field shows the numbers being
entered on the keypad.
e. The
Status
field shows the current
operating state of the system. During
normal operation (Program mode), “P”
appears in this field. During system menu
programming, “M” appears in this field.
During keyboard lock mode, “L” appears in
this field.
2. The
keypad
enables you to call up video from
individual cameras and control their pre-
programmed movement. It also provides for
camera iris control, auxiliary control, monitor
selection, and the ability to clear alarms.
3. The
focus buttons
enable you to control a
camera's focus setting.
4. The
zoom buttons
enable you to control a
camera's zoom setting.
5. The
Tracker Ball
provides variable speed
control of a camera's pan and tilt.
Figure 4 illustrates the locations of the buttons on
the ADTTE keypad.
1. LCD
Display
2. Keypad
3. Focus Buttons
(Near/Far)
5. Tracker Ball
4. Zoom Buttons
(In / Out)
STS MON CAM 1234
-L
