CHAPTER 5: SETUP SOFTWARE
UB25 LINEAR DC RESISTANCE WELDING CONTROL
990-665
5-13
System Security
1
From the
MAIN MENU
, press the
4
key
to get the
SYSTEM SECURITY
screen.
NOTE:
•
SCHEDULE LOCK
prevents unauthorized users from selecting any weld schedule other
than the displayed schedule, and from changing any weld energy/time parameters within the
weld schedule.
•
SYSTEM LOCK
prevents unauthorized users from changing any energy/time parameters
within weld schedules, but does allow different schedules to be selected. This function also
prevents any changes to menu settings.
•
CALIBRATION LOCK
prevents unauthorized users from modifying any of the calibration
settings.
NOTE
: All security options use the
same
procedure to enter a security code
and to turn off the security code.
2
Press the
1
key to select
SCHEDULE
LOCK
. This will bring up the
CHANGE STATUS
screen.
3
Enter a 7-digit number, from 0000001 to 9999999, in the code field, then enter a period. This
will bring up the
SYSTEM SECURITY
menu screen, this time
with SCHEDULE LOCK: ON
.
With
ON
selected, all other weld schedules are locked out and cannot be modified or used for
welding.
4
To unlock the Power Supply from security protection, return to the
CHANGE STATUS
screen
and enter the code that you entered in Step 2. This will bring up the
SYSTEM SECURITY
menu screen, this time with
SCHEDULE LOCK: OFF
.
5
If you forget the security code and wish to unlock the Power Supply from security protection:
a
Return to the
CHANGE STATUS
screen.
b
Enter a security code of 414, followed by a period.
6
Keep pressing the
MENU
key to return to the
MAIN MENU.
CHANGE STATUS
PASSWORD
:
– – – – – – –
NUMBERS for code followed by PERIOD
SYSTEM SECURITY
1. SCHEDULE LOCK
: OFF
2. SYSTEM LOCK
: OFF
3. CALIBRATION LOCK
: OFF
NUMBERS Select, MENU Previous menu
