MODEL UB25 LINEAR DC RESISTANCE WELDING CONTROL
990-665
xi
SAFETY NOTES
This instruction manual describes how to operate and maintain the UB25 Linear DC Welding Power
Supply and provides instructions relating to its SAFE use. Procedures described herein MUST be
performed, as detailed, by QUALIFIED and TRAINED personnel.
For SAFETY, and to effectively take advantage of the full capabilities of the workstation, please read this
instruction manual before attempting to use the UB25 Linear DC Welding Power Supply.
Procedures other than those described in this manual, or not performed as prescribed in it, may expose
personnel to electrical hazards.
After reading this manual, retain it for future reference when any questions arise regarding the proper and
SAFE operation of the unit.
Please note the following conventions used in this manual:
WARNING:
Comments marked this way warn the reader of actions which, if not followed, might result
in immediate death or serious injury.
CAUTION:
Comments marked this way warn the reader of actions which, if not followed, might result
in either damage to the equipment, or injury to the individual if subject to long-term exposure to the
indicated hazard.
Disposal
Properly handle and dispose of used materials.
For the disposal of electronic waste please contact AMADA WELD TECH.
