CHAPTER 2: GETTING STARTED
UB25 LINEAR DC RESISTANCE WELDING CONTROL
2-4
990-665
Section IV. Setup
Manual Weld Head Connections
Manual Weld Head Connections
1
Connect one end of a weld cable to the negative (
-
) weld terminal on the Power Supply.
2
Connect one end of the second weld cable to the positive (
+
) weld terminal on the Power
Supply.
3
Connect the other end of the two weld cables to the weld head.
4
Dress the weld cables together with cable ties to minimize induction losses.
5
Attach the voltage sensing cable connector to the
VOLTAGE SENSE INPUT
connector.
6
Install electrodes in the weld head electrode holders.
7
Attach voltage sensing cables to the screws on the electrode holders as shown.
