UB25 LINEAR DC RESISTANCE WELDING CONTROL
990-665
4-1
CHAPTER 4
OPERATING INSTRUCTIONS
Section I: Introduction
This Chapter tells you how to turn the Power Supply on, use menu screens to customize operating
parameters, match the Power Supply to your welding system, and how to operate the Power Supply. This
chapter is divided into the following sections:
•
Initial Setup
•
Programming Weld Schedules
•
Programming The Weld Monitor
•
Programming For Active Part Conditioning
•
Operation
Before
operating the Power Supply, you must be familiar with the following:
•
The
location
and
function
of Controls and Indicators. For more information, see
Chapter 1
of
this manual.
•
How to
select
and
use
the Control functions for your specific welding applications. For more
information, see
Chapter 3, Using UB25 Welding and Monitoring Functions
.
•
The principles of resistance welding and the use of programmed weld schedules. For more
information, see
Appendix C, The Basics of Resistance Welding.
For additional information on the welding process, see
Appendix D, Quality Resistance Welding Solutions,
Defining the Optimum Process
.
