Alstom MiCOM P846, Technical Manual

Page: 53 / 298

Getting Started P846/EN GS/D
MiCOM P846 (GS) 3-15
GS
1.10
ogram MiCOM S1 that
2000 or Windows XP based software package.
Software and provides users a direct and
iCOM Px40 relays
its
1.10.1
for the MiCOM S1 software to properly
98 or NT 4.0 (Not Windows
TM
95)
(1024 x 768 recommended),
1.10.2 COM S1
32 serial cable is properly connected to the
Please follow the instructions in section 1.9
n the PC and the relay before attempting to
lect "MiCO S1" then "MiCOM S1 Start-up".
LL MiCOM S1", WILL UNINSTALL MiCOM S1,
Y
gives access to the different application
rbance application
rams, use the blue arrows,
MiCOM S1 relay communications basics
The front port is particularly designed for use with the relay settings pr
is a Windows 98, Windows NT4.0, Windows
MiCOM S1 is the universal IED Support
convenient access to all stored data in any IED using the EIA(RS)232 front communication
port.
MiCOM S1 provides full access to
:
•
M
•
MiCOM Mx20 measurements un
PC requirements
The following minimum requirements must be met
work on a PC.
•
IBM computer or 100% compatible,
•
WindowsTM
•
Pentium II 300 Mhz minimum,
•
Screen VGA 256 colours minimum,
•
Resolution 640 x 400 minimum
•
48Mb RAM minimum,
•
500Mb free on computer hard-disk.
Connecting to the P846 relay using Mi
Before starting, verify that the EIA(RS)2
EIA(RS)232 port on the front panel of the relay.
to ensure a proper connection is made betwee
communicate with the relay.
This section is intended as a quick start guide to using MiCOM S1 and assumes you have a
copy of MiCOM S1 installed on your PC. Please refer to the MiCOM S1 User Manual for
more detailed information
.
To start MiCOM S1, click on the icon:
In the "Programs" menu, se M
WARNING: CLICKING ON "UNINSTA
AND ALL DATA AND RECORDS USED IN MiCOM S1.
ou access the MiCOM S1 launcher screen
The MiCOM S1 launcher is the software that
programs:
•
S1 for Px40 IEDs
•
S1 distu
To access these different prog
Click on the desired type of access