Alstom MiCOM P846, Technical Manual

Page: 33 / 298

Technical Data P846/EN TD/D
MiCOM P846
(TD) 2-7
TD
easure’t Setup: Invisible/Visible
:
ry
y
(Factory pre-set)
CT and VT Ratios
...1MV
ry:
kA
d/Enabled
d:
r
ce of Event Recorder
bled/Enabled
nt:
:
92:
ink strings, selecting which
Oscillography (Disturb. Recorder)
ed
l 1:
hannel 8:
nels selected from:
2/IN2
put 32:
channel assignment from
controls, logic…).
Settings, Measurements and
Records List
Settings List
Global Settings (System Data)
Language: English/French/German/Spanish
Frequency: 50/60Hz
Circuit Breaker Control
(CB Control)
CB Control by:
Disabled
Local
Remote
Local+Remote
Opto
Opto+local
Opto+Remote
Opto+Rem+local
Close Pulse Time: 0.10…10.00s
Trip Pulse Time: 0.10…5.00s
Man Close t max: 0.01…9999.00s
Man Close Delay: 0.01…600.00s
CB Healthy Time: 0.01…9999.00s
Check Sync. Time: 0.01…9999.00s
Reset Lockout by: User Interface/CB Close
Man Close RstDly: 0.10…600.00s
CB Status Input:
None
52A
52B
52A & 52B
Date and Time
IRIG-B Sync.: Disabled/Enabled
Battery Alarm: Disabled/Enabled
Configuration
Setting Group:
Select via Menu
Select via Opto
Active Settings: Group 1/2/3/4
Setting Group 1: Disabled/Enabled
Setting Group 2: Disabled/Enabled
Setting Group 3: Disabled/Enabled
Setting Group 4: Disabled/Enabled
Supervision: Disabled/Enabled
Fault Locator:
Disabled/Enabled
Input Labels: Invisible/Visible
Output Labels: Invisible/Visible
CT & VT Ratios: Invisible/Visible
Record Control: Invisible/Visible
Disturb Recorder: Invisible/Visible
M
Comms Settings:
Invisible/Visible
Commission Tests Invisible/Visible
Setting Values: Primary/Seconda
Control Inputs: Invisible/Visible
Ctrl I/P Config: Invisible/Visible
Ctrl I/P Labels: Invisible/Visible
Direct Access:
Disabled
Enabled
Hotkey
onl
CB Cntrl. only
LCD Contrast:
Main VT Primary: 100V
Main VT Sec'y:
80...140V
Phase CT Prima 1A…30kA
Phase CT Sec'y: 1A/5A
Phase CT2 Primary: 1A…30
Phase CT2 Sec'y: 1A/5A
CVT Enable:
Disable
CVT Threshol 0.00…100.00%
Tie-Line Factor: Disabled/Enabled
Base Power: 0W…5GW
Line charging: 0Var…5GVa
Sequen
(Record Control)
Alarm Event: Disa
Relay O/P Eve Disabled/Enabled
Opto Input Event: Disabled/Enabled
General Event:
Disabled/Enabled
Fault Rec. Event Disabled/Enabled
Maint. Rec. Event: Disabled/Enabled
Protection Event: Disabled/Enabled
DDB 31 - 0:
(
up to):
DDB 1022 - 9
Binary function l
DDB signals will be stored as events, and
which will be filtered out
Duration: 0.10…10.50s
Trigger Position: 0.0…100.0%
Trigger Mode:
Single/Extend
Analog Channe
(up to):
Analog C
Disturbance chan
IA/IB/IC/IN/VA/VB/VC/VND/IA2/IB2/IC
and a series of internal variables pertaining
to the DLO algorithm
Digital Input 1:
(up to):
Digital In
Selected binary
any DDB status point within the relay (opto
input, output contact, alarms, starts, trips,