Alpha Group OutBack Power MATE3, Owner'S Manual

Page: 89 / 160

Inverter Settings
900-0117-01-00 Rev A
87
~ Cool Fan enables the AUX output when the inverter reaches a high internal temperature. It is
intended to trigger a small external fan for additional cooling. This includes sealed inverter
models which come with a Turbo fan.
~ Divert DC enables the AUX output to divert excess energy to a DC load, in response to high DC
(battery) voltage. The Auxiliary output controls a larger relay, which allows current to flow to a
dedicated DC load when energized.
This option has settable DC voltage and time parameters.
Figure 84 Divert DC
~ Divert AC enables the AUX output to divert excess energy from the inverter’s output to an AC
load, in response to high DC (battery) voltage. The Auxiliary output controls a larger relay, which
allows current to flow to a dedicated AC load when energized.
This option has settable DC voltage and time parameters.
Figure 85 Divert AC
~ AC Drop enables the AUX output whenever the inverter disconnects from an AC source. It can
activate a light (or alarm) to show that the utility grid has failed or that a generator has shut off.
Set Points for
Divert AC:

Enable Voltage: Sets the high-voltage level at which
the Divert AC function turns on the AUX output. It
remains on as long as the voltage remains above this
set point.

OFF Delay: Prevents the AUX output from turning on
again for a certain amount of time, even if the voltage
rises above the Enable Voltage set point again. This
prevents nuisance cycling of the
Divert AC function.
Set Points for Divert DC:

Enable Voltage: Sets the high-voltage level at which
the Divert DC function turns on the AUX output. It
remains on as long as the voltage remains above this
set point.

OFF Delay: Prevents the AUX output from turning on
again for a certain amount of time, even if the voltage
rises above the Enable Voltage set point again. This
prevents nuisance cycling of the
Divert DC function.