Inverter Settings
900-0117-01-00 Rev A
65
Date & Time
IMPORTANT:
Some features are dependent on time and date settings. Be sure to adjust these
settings for the proper time and date for your location.
The MATE3 clock does not automatically adjust for daylight savings time.
The MATE3
does
automatically adjust for leap year.
To access the
Date & Time
menu:
1.
Access the
System Settings
menu as shown in Figure 59.
2.
Use the control wheel to highlight the
Date & Time
menu.
Press the button in the center of the control wheel to accept the selection.
3.
Use the control wheel to change the value of each set point.
Press the button in the center of the control wheel to accept the selection.
The selection should automatically advance to the next set point when the button is pushed.
Repeat for each set point.
4.
After setting the parameters for each set point, press the
TOP
navigation key to return to the
System
Configuration
screen.
Figure 61
Date & Time Menu Item
Set Points:
Hour (1 to 23)
Minutes (00 to 59)
Day (1 to 31)
Month (Jan to Dec)
Year (2010+)
Summary of Contents for OutBack Power MATE3
