Alpha Group OutBack Power MATE3, Owner'S Manual

Page: 135 / 160

MATE3 Settings
900-0117-01-00 Rev A
133
Reset to Factory Defaults Screens
This menu allows the user to erase all settings from the MATE3 and start over with the values programmed
at the factory.
To reset the MATE3 to the factory-default settings:
1. Access the MATE menu as shown in Figure 113.
2. Use the control wheel to highlight the Reset to Factory Defaults menu.
Press the button in the center of the control wheel to accept the selection.
3. Use the soft keys below the LCD to select No or Yes .
~ If < No > is selected, the screen returns to the MATE menu. No changes will be made to
any settings.
~ If < Yes > is selected, the MATE3’s settings will immediately change to the original factory values.
The screen will display the message MATE Restored to Factory Defaults . A < Continue > soft key
will appear. Pressing this key will return the screen to the MATE menu.
4. After setting the parameters for each set point, press the
TOP
navigation key to return to the
Main Menu screen.
Figure 130 MATE Reset to Factory Defaults Screens