Inverter Settings
74
900-0117-01-00 Rev A
Challenge Installer Password
This feature is not implemented at this time.
If the installer password is lost or forgotten, this process is used to reset access to the device. The screen
will generate a challenge code as shown below. Once the installer has the challenge code, it is necessary
to contact OutBack Technical Support (
see inside front cover
) to obtain a temporary installer password that
corresponds with the MATE3-generated challenge code. After entering the temporary installer password,
the installer should change the password according to their preferences.
To access the
Set User Access Level
Menu:
1.
Access the
System Settings
menu as shown in Figure 59.
2.
Access the
Change Installer Password
menu as shown in Figure 67.
3.
Use the control wheel to adjust each of the four set points.
Press the button in the center of the control wheel to accept the selection.
4.
After setting the parameters for each set point, press the
TOP
navigation key to return to the
Main Menu
screen.
Figure 70
Challenge Installer Password
Set Points:
Set points include four numerical digits from 0-9.
Summary of Contents for OutBack Power MATE3
