Alma Lasers Accent xl, Operator'S Manual

Page: 38 / 98

Installation
3.9. Storage and Transportation
3.9.1. Cooling System Drainage
If the system is to be stored in a cold area where the temperature may fall below
5ºC (45ºF), the deionized water must be drained from the cooling system.
For detailed instructions on filling and draining the coolant reservoir, refer to
Chapter 7.
3.9.2. Moving the System
The front wheels of the Accent XL system are fitted with brakes. To lock a wheel,
push its brake lever firmly downwards. To release, move the lever upwards. When
the system is stationary, the brakes must be in the locked position. Release the
brakes only when moving the system.
To move the system, use only the handle on top of the system (see Figure 3-14). Do
not pull the system by any other part.
Handle
Figure 3-14: System Handle
To transport the system to another facility, consult your Alma Lasers service
representative.
Caution
•
Never use the handpiece or umbilical cable to move the system.
•
Do not use the handpiece support arms for moving or lifting the system
3-12 Accent XL
™
Operator's Manual