Alma Lasers Accent xl, Operator'S Manual

Page: 63 / 98

Operating Instructions
6.5. Select the Handpiece
1. On the Handpiece Selection screen (see Figure 6-3), select the handpiece that
will be used for the treatment session:
•
To select the bipolar handpiece, press the
Bipolar
softkey
•
To select the unipolar handpiece, press the Unipolar softkey
2. Wait a few seconds for the system to complete the initialization process;
•
The system enters
Standby
Mode
•
The
Treatment
screen in
Standby
Mode appears (see Figure 6-4)
6.6. Graphic User Interface
The graphic user interface provides the controls and indicators required to operate
and control of the system.
All operator commands are entered by touching the appropriate area on the touch-
screen.
The graphic user interface indicates the system status by displaying the operating
parameters and modes. It also displays informative and error messages when
necessary.
Figure 6-4 shows an example of the
Main Treatment
screen.
1
2
6
7
3
4
9
5
10
11
12
8
Figure 6-4: Main Treatment Screen Elements
Accent XL
™
Operator's Manual 6-5