Alma Lasers Accent xl, Operator'S Manual

Page: 81 / 98

Troubleshooting
Table 8-1: Error Message Troubleshooting Guide
Error Message/Alarm Probable Cause Corrective Action
Date Time Error
System malfunction
1. Turn system off, wait 1
minute and restart; resume
normal operation
2. If problem persists, call Alma
Lasers Service
FlowSW OFF Error System malfunction
1. Turn system off, wait 1
minute and restart; resume
normal operation
2. If problem persists, call Alma
Lasers Service
Head Error Ibutton Fail System malfunction
1.
Make sure the handpiece
connector is properly
connected to its port.
2. If problem persists, call Alma
Lasers Service
RS232 Error System malfunction
1. Turn system off, wait 1
minute and restart; resume
normal operation
2. If problem persists, call Alma
Lasers Service
System Data Input Overload System malfunction
1. Turn system off, wait 1
minute and restart; resume
normal operation
2. If problem persists, call Alma
Lasers Service
Water Level Low
Not enough coolant in the
cooling system
1. Add deionized water to the
cooling system
2. If problem persists, call Alma
Lasers Service
Left Handpiece Not Connected
The left-side handpiece is not
properly connected to the
system
1. Connect the handpiece and
restart the system
2. If problem persists, call Alma
Lasers Service
Right Handpiece Not
Connected
The right-side handpiece is not
properly connected to the
system
1. Connect the handpiece and
restart the system
2. If problem persists, call Alma
Lasers Service
Handpiece Relay Error System malfunction Call Alma Lasers Service
Accent XL
™
Operator's Manual 8-3