Alma Lasers Accent xl, Operator'S Manual

Page: 28 / 98

Installation
3.1. Introduction
The Accent XL system is designed for installation in an office or a clinic and
requires minimal site preparation. When the Accent XL system is purchased,
complete on-site installation, including initial system testing and calibration, is
included.
System transportation and installation is carried out by Alma Lasers authorized
technical personnel, who will do the following:
•
Unpack the system and position it in its pre-selected location
•
Verify the integrity of the system and its components
•
Connect system components (handpieces, footswitch)
•
Plug the system into a designated electrical outlet
•
Fill the cooling system reservoir with deionized water
•
Test the system for proper calibration and functional operation of all
components and software
•
Coordinate the performance of an on-site safety inspection, if required
Note
Any damage to the packaging or to the system found prior to
opening the package should be reported to your Alma Lasers
representative and to the insurance carrier.
3.2. Equipment List
The Accent XL platform includes the following:
•
Accent XL console
•
Bipolar radiofrequency handpiece
•
Unipolar radiofrequency handpiece
•
Dummy handpiece connector
•
Set of keys
•
Non-contact thermometer
•
Treatment oil
•
Water filling/draining kit
•
Operator's Manual
3-2 Accent XL
™
Operator's Manual