Clinical Guide
•
During the
In-Motion
treatment mode the practitioner will move the handpiece
(while in contact with the skin) following a circular pattern within the treatment
area during each pass (i.e., 30 sec).
•
In cases when the treatment causes discomfort for any reason (i.e., heat), the
practitioner shall immediately release the handpiece trigger (or the footswitch)
to cease the RF emission, while keeping the cooled handpiece tip in contact
with the skin.
•
Application of the ‘stationary’ mode with the handpiece positioned in-place on
the skin is strictly prohibited!
•
As an alternative technique in cases a specific line (fold) is to be treated, the RF
emission can be applied for brief time intervals alternatively: 2 seconds ON and
2 seconds OFF under the operator's manual control (by pressing the footswitch
or the handpiece trigger).
A.10.2. Facial Treatment Areas
The face can be treated
bilaterally
in two distinct areas (see Figure A-2):
•
Periorbital (view
A
)
•
Perioral (view
B
)
B
A
Figure A-2: Facial Treatment Areas
Accent XL
™
Operator's Manual A-7
Summary of Contents for Lasers Accent xl
