Alma Lasers Accent xl, Operator'S Manual

Page: 34 / 98

Installation
3.7. Connecting the Handpiece
On top of each handpiece support arm, there is a handpiece holder, used for
securing a handpiece (see Figure 3-6).
Handpiece Holders
Figure 3-6: Handpieces on the Handpiece Holders
To connect a handpiece:
1. Place the handpiece in the handpiece
holder (see Figure 3-6).
2. Verify that the support arm is raised high
enough to enable you to open the control
panel without dislodging the handpieces
from their holders.
3. Open the control panel to access the
handpiece connection port (see Figure
3-7).
Figure 3-7: Control
Panel Opened
3-8 Accent XL
™
Operator's Manual