Alcatel Vacuum Technology Adixen ATH 1300 M, User Manual

Page: 89 / 122

C 40
Controlling the pump
using the controller front panel
Alcatel Vacuum Technology France - User’s Manual ATH 1300 M/MT - ATH 1600 M/MT
Welcome
GB 00748 - Edition 04 - June 98
1/2
The pump is started up to
reach the selected speed.
The yellow rising speed indicator light comes on. When
the pump reaches its selected speed, the yellow indicator
light goes off and the green indicator light comes on.
The speed indicator light
comes on. The pump regulates
its speed to reach the pre-defined value
(see C 30) .
The rotation speed monitoring indicator light goes off.
The pump motor is no longer powered, the pump
decelerates.
Yellow lit
Standby mode selected.
Start up the pump by
pressing
Stop the pump by
pressing
Select the reduced speed
mode by pressing
Red lit
The pump is faulty.
This fault is accompanied
by an audible signal.
Red flashing when an alert
appears.
STAND
BY
START
STOP
Yellow lit
The pump rotation speed
is
lower than the
selected speed.
Green flashing
The pump rotation speed is
higher
than the selected speed
(decrease of the selected
speed during operation).
Green lit
The pump has reached
the selected speed.
Rotation indicator lights:
FAULT
FAULT
FAULT