Alcatel Vacuum Technology Adixen ATH 1300 M, User Manual

Page: 31 / 122

B 10
Safety instructions
5/5
GB 00731 - Edition 05 - November 02
Alcatel Vacuum Technology France - User’s Manual ATH 1300 M/MT - ATH 1600 M/MT
Located on the pump housing, this
label warns the user against
possible risk of injury due to any
hand contacts with hot surface. It demands to use
protective gloves before any intervention is performed.
WARNING
Contact may cause burn.
Do not touch or wear protective gear
before servicing.
HOT SURFACE
Located on the pump housing, this
label indicates that due to its heavy
weight, the product should not be
handled manually, but always through appropriate
handling devices.
WARNING
Can cause muscle strain or back injury.
Use lifting aids and proper lifting
techniques when removing or replacing.
HEAVY OBJET
Located on the pump housing, this
label indicates that some of the
internal parts are energized and
could cause electrical shocks in case of contact. It advices
to disconnect the pump before any intervention or to
properly lock-out and tag-out the equipment breaker
before any intervention on the pump.
WARNING
HAZARDOUS VOLTAGE ENCLOSED
Danger risk of electric shock, disconnect main
power source and heater power. (if heater
is used, max 110/230 V, 300 VA, 50/60 Hz).
Prior to servicing and wait 5 minutes before
working on this equipment.
Located on the
pump housing, this
label warns the
user against pumped process gas that could be dangerous
and toxic and could cause severe injuries or death. It
precises that any preventive maintenance operation can
only be performed by trained personnel.
WARNING
FLAMMABLE, CORROSIVE AND TOXIC
CHEMICALS LOCATED WHITHIN THE ENCLOSURE
Explosure may result in severe injury
or death.
Preventive maintenance must be done
by trained personnel only.
Pump connection to the installation :
It is strongly recommended to secure the maglev
turbopump installation to prevent any safety
hazard to the user in standard operating
conditions. Refer to B30.
WARNING