Alcatel Vacuum Technology Adixen ATH 1300 M, User Manual

Page: 28 / 122

B 10
Safety instructions
2/5
GB 00731 - Edition 05 - November 02
Alcatel Vacuum Technology France - User’s Manual ATH 1300 M/MT - ATH 1600 M/MT
• The EMC performance of the product is obtained on
the condition that the installation complies with EMC rules.
In particular, in disturbed environments,
it is essential
to:
- use shielded cables and connections for interfaces,
- stabilize the power supply line with shielding from
the power supply source to a distance of 3 m from
the product inlet.
• Magnetic field level: the level for the static fields
measured at the exterior of the pump is a maximum of
0.2 mT.
• The units containing control circuits are designed to
guarantee normal safety conditions taking their normal
operating environment into account (use in rack).
In specific cases of use on tables, make sure that no
objects enter the ventilation openings or block the openings
when handling the units.
When switching off an item of equipment
containing loaded capacitors at over 60 VDC or
25 VAC, take precautions concerning the access
to the connector pins (single-phase motors,
equipment with line filter, frequency converter, monitoring
unit, etc.). Wait 1 minute after pump switch off before
operating on the product.
WARNING
When handling the equipment, use
the devices provided for this
purpose (hoisting rings, handle, etc.).
WARNING
Can cause muscle strain or back injury.
Use lifting aids and proper lifting
techniques when removing or replacing.
HEAVY OBJET
Risk of tilting over: although compliance with
EEC safety regulations is guaranteed (normal
range ± 10°), it is recommended to take
precautions against the risk of tilting over
during handling, installation and operation (refer to A 60
for the location of the center of gravity) for pump and
controller.
WARNING