Alcatel Vacuum Technology Adixen ATH 1300 M, User Manual

Page: 83 / 122

C 20
Controller start-up
1/2
GB 01735 - Edition 03 - Januar
y 04
Alcatel Vacuum Technology France - User’s Manual ATH 1300 M/MT - ATH 1600 M/MT
The controller performs
a self-test and identifies the
pumps to which it is
connected.
The initialization time is
approximately 20 seconds.
Display initialization:
The equipment is identified,
the program version is
displayed.
Indicator lights test:
they are lit in succession.
The working screen is
displayed (connected pump
identification).
C H E C K IN G P R O C E D U R E
KEYB XX H
ACT XXXX V3.XX
ATH XXXX X
READY TO START!
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Parameter setting
access
Selection
Validation
• used to access the parameter setting mode.
• used to exit the various menus without validating the functions.
• used to move in the menus, or from one parameter to another.
• used to select or adjust the value of the selected parameter.
• used to validate the selection of a menu, parameter or value.
• used to exit the menus and return to the pump parameter
display.
The message on the display are:
• during acceleration, the nominal speed:
“
STARTing
“ and the green light is OFF.
• pump at speed and pump not at choosen temperature:
“
WAITING HEAT
“ and green light is ON.
• pump at speed and at temperature (minus 3°C):
“
OK FOR PROCESS
“, and the green light is ON.
The parameter setting keys
Once the various electrical connections have been made, set
the main switch on the rear panel to "
I ".
PREVIOUS
ENTER
STATUS
FAULT