AL-KO PRO 140 /QSS OHV, Information Manuals Service

Page: 13 / 92

GB
474169_c
Transport
„
Transport the engine only when fuel tank is empty.
„
Always transport the engine with the spark plug at the
top. Otherwise it may lead to:
„
Smoking
„
Difficulty in starting
„
A sooty spark plug
Check before operation
Warning!
Always conduct a visual check prior to operation.
The equipment must not be used if any machine
components are damaged or worn.
Check the general condition of the engine
„
Signs of oil or fuel leaks on the outside or underside of
the engine
„
Signs of damage
„
All bolts and nuts are tight
„
All protective covers are attached
„
Fuel level
„
Oil level
„
Air filter element
Fill with fuel and lubricant
Safety
Warning - Fire hazard!
Petrol is highly flammable.
Sparks occur when the engine is started. This may
ignite flammable gases in the vicinity.
Combustible materials such as leaves, grass etc
can ignite.
„
Store petrol only in containers made for that purpose.
„
Refill with petrol only outdoors.
„
Do not smoke during refilling.
„
Do not remove fuel cap while engine is running or still
hot.
„
Replace damaged fuel tank or fuel cap.
„
Always ensure that fuel cap is closed tightly.
„
In case of petrol spillage:
„
Do not start engine.
„
Do not test the ignition.
„
Clean the equipment.
„
Let the engine cool off and prevent spillage when
refilling the tank.
Technical Data
Engine type AL-KO PRO 140 /QSS OHV AL-KO PRO 160 /QSS OHV
Length x Width x Height 430 x 380 x 380 mm 430 x 380 x 380 mm
Empty weight 11,9 kg 12 kg
Cubic capacity
(Bore x Stroke)
140 cm
3
(61 x 48 mm)
159 cm
3
(65 x 48 mm)
Power 2.1 kW / 2800 rpm 2.3 kW / 2800 rpm
Engine oil - quantity 0.55 L 0.55 L
Petrol tank capacity 1.2 L 1.2 L
Cooling system Air cooling Air cooling
Ignition system Electronic ignition Electronic ignition
Engine shaft direction Clockwise Clockwise
Spark plug gap 0.7 mm - 0.8 mm 0.7 mm - 0.8 mm