152
Chapter 13: Using the Effects
6. Press the [MASTER] key and adjust the Send Master 1 level.
Leave the level to 100 (default). Fine-adjust the level later while playing the DPS16.
7. Set the FX1’s Bus parameter to “
ON
”.
Now the signal output from the FX1 (the reverb sound in this example) is sent to the ping-pong bus and mixed
with the original dry sound from the TRACK MIX channels.
8. Adjust the Effect Return 1 level in the same screen.
The Effect Return 1 parameter determines the return level (the level of signal sent from FX1 to the ping-pong bus).
Leave the level to 100 (default). Fine-adjust the level later while playing the DPS16.
➸
NOTE :
The
Bus
and Effect Return 1–4 parameters on this screen are the same as the
Bus
and
Level
fields on the Effect screen.
9. Assign the ping-pong bus L/R signals to tracks 15 and 16 in Quick Patch mode.
The original dry sound from TRACK MIX channels 1–8 is mixed with the FX1’s effect sound in the ping-
pong bus, then sent to tracks 15 and 16.
<ex. Ping-pong bus L/R signals are assigned to tracks 15 and 16.>
