manualshive.com logo in svg

Akai DPS 16, Operator'S Manual

The Akai DPS 16 Operator's Manual Addendum is a must-have manual for any user of this remarkable product. Featuring in-depth instructions and insights, this manual is available for download absolutely free from manualshive.com, helping you master every aspect of your DPS 16 and maximize its potential.

Share
Download
background image

60

Chapter 5: Assigning Input Signals and Tracks

Main V. Track mode screen

The DPS16 offers two types of tracks: physical tracks and virtual tracks. Virtual tracks are used to store audio
data. Unless you assign them to physical tracks, you cannot record or edit in virtual tracks. In V. Track mode, you
can assign virtual tracks to physical tracks.

Press the 

[V.TRACK]

 key to display the following Assign Virtual Track screen.

1

2

3

The Assign Virtual Track screen shows the following information.

1

Track

Indicates the physical track numbers.

2

Virtual Track

Indicates the virtual track number assigned to physical tracks. When the DPS16 is in default mode, virtual
tracks 1–16 are assigned to physical tracks 1–16.

3

Virtual Track List

Lists the virtual tracks. Unused virtual tracks are represented by “

(unused)

” and recorded tracks are automati-

cally named. (You can rename them at any time.)

Summary of Contents for DPS 16







































































































































































































Reviews:

No comments

Related manuals for DPS 16

Avid Technology Avid KeyStudio User Manual preview
Avid KeyStudio
Brand: Avid Technology Pages: 46
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8
Roland JX-10 Owner'S Manual preview
JX-10
Brand: Roland Pages: 73
Boundless CFX User Manual preview
CFX
Brand: Boundless Pages: 22
Yamaha Portatone PSR-172 Service Manual preview
Portatone PSR-172
Brand: Yamaha Pages: 16
Yamaha PortaTone PSR-15 Owner'S Manual preview
PortaTone PSR-15
Brand: Yamaha Pages: 16
Yamaha PortaTone PSR-16 Owner'S Manual preview
PortaTone PSR-16
Brand: Yamaha Pages: 20
Yamaha PORTATONE PSR-190 Owner'S Manual preview
PORTATONE PSR-190
Brand: Yamaha Pages: 26
Yamaha PortaTone PSR-180 Owner'S Manual preview
PortaTone PSR-180
Brand: Yamaha Pages: 26
Yamaha PortaTone PSR-185 Owner'S Manual preview
PortaTone PSR-185
Brand: Yamaha Pages: 28
Yamaha PortaTone PSR-150 Product Manual preview
PortaTone PSR-150
Brand: Yamaha Pages: 26
Yamaha Portatone PSR-18 (Japanese) User Manual preview
Portatone PSR-18
Brand: Yamaha Pages: 36
Yamaha PortaTone PSR-195 (French) Mode D'Emploi preview
PortaTone PSR-195
Brand: Yamaha Pages: 48
Yamaha Portatone PSR-172 Owner'S Manual preview
Portatone PSR-172
Brand: Yamaha Pages: 64
Yamaha Portatone PSR-160 Owner'S Manual preview
Portatone PSR-160
Brand: Yamaha Pages: 64
Yamaha Portatone PSR-1500 Service Manual preview
Portatone PSR-1500
Brand: Yamaha Pages: 162
Yamaha Portatone PSR-1500 Owner'S Manual preview
Portatone PSR-1500
Brand: Yamaha Pages: 220
Sanako Lab 100 User Manual preview
Lab 100
Brand: Sanako Pages: 172

Brands by name

Popular brands

Load more brands