178
Chapter 13: Using the Effects
PHASER/DELAY
This monaural effect consists of a phaser effect and a delay effect connected in series.
1
2
3
4
5
6
7
8
Parameter
Setting range
Function
1
Rate *1
0.1Hz – 10.0Hz
Adjusts the speed of LFO for the phaser effect.
2
Depth *2
0 – 127
Adjusts the depth of LFO for the phaser effect.
3
Fdback *3
0 – 127
Adjusts the amount of the phaser effect feedback.
4
Delay *4
1ms – 1500ms
Adjusts the delay time of the delay effect.
5
Fdback *5
0 – 127
Adjusts the amount of the delay effect feedback.
6
Bounce *6
ON/OFF
Sets whether the delay sound is panned (ON) or not.
7
Balance
+50 – 0 – –50
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
8
Effect
ON/OFF
Switches the effect sound output on and off.
DISTORTION
This monaural distortion effect distorts input signals. An equalizer is connected to the effect in series.
1
2
3
4
5
Parameter
Setting range
Function
1
Depth *1
0 – 31
Adjusts the depth of distortion.
2
EQ freq *4
0 – 127
Adjusts the center frequency of the EQ.
3
EQ Gain *5
–15dB – +15dB
Adjusts the gain of the EQ.
4
EQ Q *6
0.5 – 10
Adjusts the Q of the EQ.
5
Effect
ON/BYPASS
Selects whether the effect is enabled (ON) or bypassed (BYPASS).