46
Chapter 3: Transport/Locate Operation
Deleting a locate point from the locate list
You can delete a locate point stored in the locate list.
1. Press the [GO TO] key while the DPS16 is stopped.
The Locate List window appears, showing the list of stored locate points.
2. Use the [CURSOR] keys or the [JOG] wheel to select a locate point you wish to delete.
3. Press the [F4] (
ERASE
) key.
The selected locate point is deleted.
✐
TIP :
Press the
[F1]
(
CLOSE
) key to cancel the delete operation.
Using the Direct Locate function
The Direct Locate function enables you to assign locate points to the
[INPUT SELECT]
keys and the
[TRACK
SELECT]
keys to locate a point immediately.
■
Storing direct locate points
1. Press the [MEMORY] key to capture the desired locate point.
You may store locate points while the DPS16 is recording, playing, or stopped. When you press the
[MEMORY]
key, the following Locate Memory window opens, indicating the time value in the
Time
field at
which you pressed the
[MEMORY]
key.
2. Press one of the [INPUT SELECT] keys or [TRACK SELECT] keys.
The captured locate point is stored in the specified key as a direct locate point.
✐
TIP :
Press the
[F1]
(
CLOSE
) key to cancel the operation.
■
Using the stored direct locate points
1. Press the [GO TO] key while the DPS16 is stopped.
The Locate List window appears.
2. Press one of the [INPUT SELECT] keys or the [TRACK SELECT] keys.
The DPS16 locates the point stored in the key you pressed and closes the window.
