168
Chapter 13: Using the Effects
TAPE ECHO
This delay effect simulates a three-head tape echo machine. You can set three delay times individually. This effect
has mono-in and mono-out; however, you can adjust the pan setting of the effect sound.
1
2
3
4
5
6
7
8
Parameter
Setting range
Function
1
Head 1 *1
1ms – 1500ms
Adjusts the delay time of Delay 1.
2
Head 2 *2
1ms – 1500ms
Adjusts the delay time of Delay 2.
3
Head 3 *3
1ms – 1500ms
Adjusts the delay time of Delay 3.
4
Fdback *4
0 – 127
Adjust the amount of delay feedback.
5
HFdamp *5
20Hz – 20kHz
Sets a frequency at which the higher range of the feedback sound is cut.
6
Pan *6
L63 – MID – R63
Adjusts the stereo image of the effect sound.
7
Balance
+50 – 0 – –50
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
8
Effect
ON/OFF
Switches the effect sound output on and off.
REVERB>SMALL ROOM
This stereo reverb effect simulates reverberations in a small room.
1
2
3
4
5
6
7
Parameter
Setting range
Function
1
Pre-D *1
1ms – 100ms
Adjusts the delay time of early reflections.
2
Time *2
0.1sec – 10sec
Adjusts the time of attenuation of reverberation.
3
Diff *3
0 – 127
Adjusts the density of reverberation.
4
HFdamp *4
20Hz – 20kHz
Sets a frequency at which the higher range of reverberation is cut.
5
Width *6
0 – 127
Adjusts the width and spread of the stereo image.
6
Balance
+50 – 0 – –50
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
7
Effect
ON/OFF
Switches the effect sound output on and off.
