manualshive.com logo in svg

Akai DPS 16, Operator'S Manual

The Akai DPS 16 Operator's Manual Addendum is a must-have manual for any user of this remarkable product. Featuring in-depth instructions and insights, this manual is available for download absolutely free from manualshive.com, helping you master every aspect of your DPS 16 and maximize its potential.

Share
Download
background image

130

Chapter 11: Using a Disk (Disk Mode)

Follow the steps below to defragment audio data.

1. On the Disk List screen, move the cursor to the hard disk you wish to defragment.

Select from the devices with the 

NOW SELECTED

 or 

RECORDABLE DISK

 indication in the 

Status

 field.

2. Press the [F5] (

ALIGN

) key.

The following screen appears.

3. Press the [F5] (

FULL

) or [F6] (

JOIN

) key, depending on the method chosen.

The DPS16 executes the selected defragmentation method (

FULL or JOIN

).

Press and hold the 

[F1]

 (

CANCEL

) key down to cancel the operation.

4. When defragmentation is completed, the following screen appears.

Press any key to return to the Disk List screen.

Copying data on the disk

You may copy all data on the current disk to another disk. This is useful when you wish to back up the current
condition of the current disk.

CAUTION : 

Data existing on the destination disk will be deleted and replaced with the copy source data.

➸

NOTE :

• Make sure that the available space of the destination disk is larger than the size of the copy data. (You can

check the size of the used space of the current disk in the 

Current Disk

 field of the Disk List screen.)

• The contents and position of the source data are reflected on the destination “disk”. For example, Undo

data stored on the copy source disk will be copied to the destination disk. Also, if the source disk has
fragmentation, it will be reflected on the destination disk.

Summary of Contents for DPS 16







































































































































































































Reviews:

No comments

Related manuals for DPS 16

Palm 3245WW - Wireless Keyboard With Bluetooth... User Manual preview
3245WW - Wireless Keyboard With Bluetooth...
Brand: Palm Pages: 40
B-Speech MiniPad BK300 User Manual preview
MiniPad BK300
Brand: B-Speech Pages: 21
TE-Group mr Handsfree Blue iCover Mini User Manual preview
mr Handsfree Blue iCover Mini
Brand: TE-Group Pages: 6
Pyramid Imaging CAMERA LINKT CLT-351L User Manual preview
CAMERA LINKT CLT-351L
Brand: Pyramid Imaging Pages: 49
Hunt CCTV HKB-1100KI User Manual preview
HKB-1100KI
Brand: Hunt CCTV Pages: 120
Ectaco Partner EKS430T User Manual preview
Partner EKS430T
Brand: Ectaco Pages: 21
BFT ESPAS10 MONEYBOX Installation And User Manual preview
ESPAS10 MONEYBOX
Brand: BFT Pages: 26
Huawei Hall Quick Manual preview
Hall
Brand: Huawei Pages: 19
Honeywell Intermec CV41 User Manual preview
Intermec CV41
Brand: Honeywell Pages: 118
D-MAX DCK-500B User Manual preview
DCK-500B
Brand: D-MAX Pages: 47
Yamaha Clavinova CLP-340 Installation Procedure preview
Clavinova CLP-340
Brand: Yamaha Pages: 2
Yamaha Clavinova CLP-330 Midi Data Format preview
Clavinova CLP-330
Brand: Yamaha Pages: 7
Yamaha Clavinova CLP-100 Owner'S Manual preview
Clavinova CLP-100
Brand: Yamaha Pages: 11
Yamaha Clavinova CLP-350 Owner'S Manual preview
Clavinova CLP-350
Brand: Yamaha Pages: 19
Yamaha CE25 Owner'S Manual preview
CE25
Brand: Yamaha Pages: 11
Yamaha Clavinova CLP-250 Owner'S Manual preview
Clavinova CLP-250
Brand: Yamaha Pages: 17
Yamaha Clavinova CLP-760 Owner'S Manual preview
Clavinova CLP-760
Brand: Yamaha Pages: 27
Yamaha Clavinova CLP-380 Data List preview
Clavinova CLP-380
Brand: Yamaha Pages: 42

Brands by name

Popular brands

Load more brands