64
EXPERT LA rev.00
EXPERT LA
Light Settings
Select:
Main menu
Start/Stop
Lights*
Select the desired light program
*Accessible if light programs are used (sec. 4.5).
•
Set the following parameters.
Day:
This is the day at which the selected pro-
gram starts. It can be set from -5 to 450
days. Negative day values are used to pre-
pare the house before letting the animals
enter the building.
Lights on 24 Hours:
Select
“Yes”
for lights to stay lit all day long;
select
“No”
to use light cycles. Note that all
of the following light cycle parameters are
not displayed if this parameter is enabled.
The following parameters are
accessible if the “Light on 24
Hours” parameter is disabled
above.
Minimum Intensity:
Set the light intensity that is used when light
cycles are off. Adjustable from 20 to 100%
or to 0% (Off).
Sunrise:
When a cycle starts, the light intensity in-
creases from its minimum to its maximum
intensity over this delay (see previous graph).
Set the sunrise delay to the desired value
(from 0 to 60 minutes).
Sunset:
When the stop time of a light cycle is reached,
the light intensity gradually decreases from
its maximum to its minimum intensity over
this delay (see previous graph). Set the sun-
set delay to the desired value (from 0 to
60 minutes).
Number of Cycles:
Select how many cycles must be performed
during the selected light program. Adjust-
able from 1 to 6 cycles.
Main menu
Start/Stop
Lights
Light Settings Program X
Use to navigate
Day
7 days
Lights on 24 hours?
No
Minimum intensity
20 %
Sunrise
2 min
Sunset
2 min
Number of cycles
1
Cycle
Cycle 1
Start Time
12:00A
Stop Time
12:00A
Standard Intensity
100 %
Use light peaks?
Yes
Peak Cycle
0:15 (h:m)
Peak Duration
1 min
Peak Intensity
80 %
Peak Sunrise
2 min
Peak Sunset
2 min
29
EXPERT LA rev.00
EXPERT LA
4.9
Night Settings
Night functions allow changing the target room
temperature and the minimum ventilation level
when the night comes.
Select:
Main menu
Setup*
User
Day/Night
*
A password may be required to access this menu (sec. 4.2).
•
Set the following parameters:
Night Set Point?
Select “Yes” to use a different target tem-
perature at night; select “No” to disable this
function.
Day Time
Set the time at which day settings start be-
ing used.
Accessible if a night function is enabled above.
Main menu
Setup
User
Day/Night
Day Night Settings
Use to navigate
Night SetPoint?
Yes
Day Time
6:00A h:m
NightTime
6:00P h:m
Transition
60 min
Night Time
Set the time at which night settings start
being used.
Accessible if a night function is enabled above.
Transition
If the night set point is enabled above, a tran-
sition is made from one set point to the other.
Set this transition time to the desired value.
