Displaying Data
6
6000 Series Oscilloscope User’s Guide
267
2
Specify the I
2
C signals:
a
Press the
Settings
softkey to access the I
2
C Signals Menu.
b
Press the
SCL
softkey, and use the Entry knob to select the
channel probing the clock signal.
c
Press the
SDA
softkey, and use the Entry knob to select the
channel probing the data signal.
3
For the I
2
C signals, make sure the trigger or threshold levels
are set to the middle of the signals:
•
For analog channels, turn the Trigger Level knob.
•
For digital channels, press the
D15 Thru D0
key and the
Thresholds
softkey to access the threshold level setting
softkeys.
4
If the decode line does not appear on the display, press the
up-arrow softkey to return to the previous menu, then press
the
Decode
softkey to turn it on.
5
If the oscilloscope is stopped, press the
Run/Stop
key to
acquire and decode data.
N O T E
If you have already set up an I
2
C trigger, the signals have already been
specified, and you can continue on with
.
Changing I
2
C signals in the Serial Decode setup also changes them in the
Trigger setup.
I
2
C clock
channel
I
2
C data
channel
Return to
previous menu
Summary of Contents for InfiniiVision DSO6014L
